Anti Corrosion Welded Steel Bar Grating , Powerful Open Steel Floor Grating

Anti Corrosion Welded Serrated Steel Bar Grating , Powerful Open Steel Floor Grating

Description:

Steel grating plate, also known as steel grating, grille plate, is flat steel in accordance with a certain
spacing and cross bar arrangement, and welded into a middle with a square grid of a steel products, mainly used to do ditch cover Plate, steel platform plate, steel ladder of the step board. The bar is generally made of twisted square steel.

Grating, serrated, 3ft wide × 20ft long

• Description: (1-1/4" × 3/16") bearing bar size, 4" cross bar spacing, open ends.
• Hot-dip galvanized, minimum 640ml/m² (2 oz,/sq.ft) in accordance with ASTM A123.

Serrated carbon steel grating

• Twist bar rod.
• 25 mm height × 5 mm thickness.
• Size 3' × 20'.

Serrated steel grating panel 3ft × 20ft

• Serrated grating, pitch 40/100, flat bar 5 mm × 38 mm, size: 3ft × 20ft.
• Serrated grating, pitch 40/100, flat bar 5 mm × 25 mm, size: 3ft × 20ft.
• Serrated grating, pitch 40/100, flat bar 3.8 mm × 25 mm, size: 3ft × 20ft.

Galvanised serrated steel gratings

• Bearing bar: 25 × 3 mm × 6m, mesh: R40 × 100 mm, size: 6mtr × 3 fts, cross bar 5 mm twisted.
• Bearing bar: 25 × 4 mm × 6m, mesh: R40 × 100 mm, size: 6mtr × 3 fts, cross bar 6 mm twisted.
• Bearing bar: 25 × 4.5 mm × 6m, mesh: R40 × 100 mm, size: 6mtr × 3 fts, cross bar 6 mm twisted.
• Bearing bar: 30 × 4.5 mm × 6m, mesh: R40 × 100 mm, size: 6mtr × 3 fts, cross bar 6 mm twisted.
• Bearing bar: 40 × 3 mm × 6m, mesh: R40 × 100 mm, size: 6mtr × 3 fts, cross bar 5 mm twisted.
• Bearing bar: 40 × 4 mm × 6m, mesh: R40 × 100 mm, size: 6mtr × 3 fts, cross bar 6 mm twisted.
• Standard grating panel, non-galvanized , open end; FB25 × 5 pitch 30 mm (serrated) and cross bar (twisted bar 6 mm) pitch 100 mm.
• Standard grating panel, non-galvanized , open end ; FB32 × 5 pitch 30 mm (serrated) and cross bar (twisted bar 6 mm) pitch 100 mm.

Steel grating, serrated, carbon steel, ANSI/NAA MM (MBG531)

• High 1" × 3/16" thick, dimensions 3' × 20', separation between plates 1 3/16".
• Bar separation 4", bar diameter ¼", galvanized ASTM A-123.

Grating Standardizations:

1. We can provide free steel bar grating samples of small sizes, but customers need to pay the express cost.(This can be discussed)

2. OEM is accepted. We have technical engineers. Then we can design steel bar grating for customers’

projects, and make

products according to customers’ drawing.

3. Once receiving customers’ inquiries. Our company promises to provide services within 24 hours.

Picture: